The rubber cutter mainly consists of a rubber cutter, a rack, a working cylinder, a base, an auxiliary worktable, a hydraulic system, an electrical system, and so on. The base under the rubber cutter is equipped with nylon or soft lead pads.
To protect the blade of a plastic cutter.
When raw rubber is cut, the rubber material is placed under the cutter by hand, and then the start button is pressed, then the rubber cutter cuts the rubber material along the sliding path on the frame under the driving of the piston rod.
The rack is equipped with two upper and lower limit switches to control the reversing valve to change the movement direction of the cutter and to protect the cylinder head of the piston cylinder.
Rubber cutting machine waste tire cut-off machine
To cut the whole tire, rubber block and rubber board in to rubber strip.
2.Structure and principl
a.This machine is composed ofa pair of blade, reducer, frame and rotational mechanismetc.
b.The basic principle is: Rotating institutions by reducer to drive two blades and make relative operation, prompting two blades of uniform shear trend, , making the material placed between the two blades onward, in order to achieve forward shear effect.
Rated cut-off force(kn)
Working oil pressure(Mpa)
we can design and manufacture all kinds of non-standard rubber machinery according to the requirements of the customers.