This vulcanizing machine is used for vulcanizing all kinds of rubber and plastic model products, and non-model products.
Being a column structure and downward pressing type, the heating plate opens by the self-weight of the heating plate, platform and plunger. The rising of the plunger makes the heating plate close while the hydraulic oil provides the pressure.
1. The material of the piston is LT-P chilled cast iron, the surface is chilled cast iron of vanadium and titanium alloy hard and wearable. It is burnished and polishing by manpower. The hard surface depth can reach to 0.5-0.7mm.
The cylinder mateerial is QT500-7 ductile cast rion and the inside surface is high pressure and nitroger treatment, the surface is burnished and polishing by manpower too. The hard surface depth can reach to0.7-0.9mm.
The set of hydraulic cylinder contain pistin, cylinder , gland ring and the flange. The flange press the gland in order to pevent spillage oil. The material of the gland rig(XY) is oil resistance rubber.The hydraulic system are fond and maching by ourself.
2. The electricit system we can useMITSUBISHI, DELTA , SCHNEIDER,SIEMENS etc .You can choose option what kind brand that you want.
3. The hydraulic contain three sets low-prssure motor pump and one set high pressure motor pump.
You can also appointment brand of the motor and pump you want. Our engineer can redesign it according to you specific demand.
Technical parameter of conveyor belt hydraulic press:
|Pressure unit of platen||3.13||3.5||3.5||3.54||3.4||3.5|
|Max. ram stroke(mm)||400||300||400||600||400||300|
|Pressure of cooling water(MPA)||0.3||0.3||0.3||0.3||0.3||0.3|
|Application||Conveyor belt||Conveyor belt||Conveyor belt||Conveyor belt||Conveyor belt||Conveyor belt|