The batch off cooling machine is used for cooling, folding and depositing the rubber strip that comes from the open mills or twin screw extruder.The rubber is pressed into a film after molding or kneading. The device can be longitudinally divided for higher temperature film, coated release agent, cooling, drying, and then automatically folded into a stack
There are two structure types: overhead and floor-standing types, whose hanging racks are vertically turning with compulsive cooling. The rubber strip hanging bar adopts step by step cylinder or motor-reducer for driving. It consists of mainframe and electrical control system. The mainframe is composed of splicer, printing, slitter, isolation cooling, lifting device, hanging strip cooling, auto wig wag section, weighing, handrail, platform and supporting bracket etc. The electrical control system consists of main control cabinets, and there're emergency stop device in key areas.
The machine is mainly composed of two main components: main control and electronic control system. The host is divided into access to the transport device, cooling and mixing device, to enhance the installation, hanging plastic device, automatic picking device, put plastic delivery device, put plastic installation, escalators, railings, platforms and other parts. Equipped with pneumatic control device for longitudinal cuttings. The electronic control system consists of three control cabinets, one main control box, two sub-control boxes and two button boxes, and set up emergency control at the key point. Installation. The main control box and the two sub-control box control each other, and the master control device running command, the two secondary control box must be given a reset command to confirm the implementation of the order. Otherwise the device will not run.
|Max Rubber Sheet Width||600||800||900|
|The Thickness Of Rubber Sheet (mm)||4-10||4-10||6-12|
|Linear Speed of Taking-in Sheet||11~22m/min||0~26m/min||3~35m/min|
|Axial Fan||0.37KW 5760m3/h||0.37KW 5760m3/h||0.37KW 5760m3/h|
|Swing range and frequency||1.3m 10-16/min||1.3m 10-16/min||1.3m 10-16/min|
|Rubber strip temperature after cooling||≤Room temperature+5ºC||≤Room temperature+5ºC|| |
|Speed-adjusting frequency motor of lifting device||XWD5.5-1/23||XWD5.5-1/23||XWD5.5-1/23|
|Speed-adjusting frequency motor of rubber swing device||XWD1.1-5-1/87||XWD1.1-5-1/87||XWD1.1-5-1/87|
|Rubber bar pitch||160 or 101.6||160 or 101.6||160 or 101.6|
|Max hanging height of rubber strip||1400mm||1400mm||1400mm|